Nitecore TIP SE 700 Lumens Rechargeable Keychain EDC Flashlight

The Nitecore TIP SE flashlight offers a maximum output of 700 lumens with a reach of 90 meters, ideal for everyday EDC use and emergency lighting. Equipped with 2 OSRAM P8 LEDs and integrated 500mAh Li-ion battery rechargeable via USB-C and certified IP54. Ultra-compact and lightweight, this 26g keychain flashlight combines exceptional performance and extreme practicality for all your travels.

Dual OSRAM P8 LED and Lighting Modes

The dual OSRAM P8 LED system offers remarkable power of 700 lumens in an ultra-compact format, ideal for high-performance EDC lighting. 2-button interface (Power and Mode) allowing complete control with 4 adjustable brightness levels. Two operating modes: DEMO mode (automatic shutdown after 30 seconds) and DAILY mode (stays on until manual shutdown). Integrated memory function returns directly to last used settings. Direct and momentary access to Turbo and Low modes for instant adaptability. Integrated 500mAh Li-ion battery with fast USB-C recharging in approximately 2 hours via integrated side port with charging indicator (red during charging, green when charged).

Ultra-Compact Construction and Military-Grade Robustness

Designed to endure years of intensive use, the TIP SE combines military-grade HAIII hard anodized aluminum in a format shorter than a car key. Impacts, rain, everyday dust, this flashlight survives everything thanks to its IP54 certification and its 2 metal rings supporting 30kg tensile strength. Hook it to your bag, belt or cap without any worry. With 50 hours maximum runtime and only 26 grams, it becomes that tool you carry everywhere without even thinking about it. The included removable clip offers even more versatility, on your shirt pocket during your shift, on your bag hiking on weekends. The 2 OSRAM P8 LEDs deliver perfect uniform lighting for everything, from technical inspection to camping lighting.

Operating Instructions

2 buttons: Power button (ON/OFF) + Mode button for complete control

ON/OFF: Press the ON/OFF button to turn the light on or off.

Operating Modes: The TIP SE flashlight has two modes. A DEMO mode (default) and a DAILY mode. The user can switch between them according to preferences.

Mode Selection: Press and hold both buttons until the LED flashes to switch between modes. 1 Flash corresponds to DEMO mode, 2 flashes correspond to DAILY mode.

DEMO Mode: In this mode, the light stays on for 30 seconds then turns off automatically.

DAILY Mode: Press the Power button to turn on the light. It will stay on until the Power button is pressed again. Note: In DEMO mode reactivating the light within 3 seconds following an automatic shutdown will switch to DAILY mode.

Brightness Level: When the light is on, press the Mode button to adjust brightness between Low, Medium and High. The light has a memory function that allows returning directly to the last settings used when the light was turned off.

Momentary Access to Turbo and Low Modes: When the light is off, press and hold the Power switch for more than two seconds to momentarily access Low mode. Release to turn it off. When the light is off, press and hold the Mode button for more than two seconds to momentarily access Turbo mode. Release to turn off. When the light is on, press and hold the Mode button to momentarily access Turbo mode. Release to return to the previous brightness level.

Direct Access to Turbo and Low Modes: When the light is off, press and hold the Mode button and release it after approximately 0.6 seconds to directly access Turbo mode. When the light is off, press and hold the Power button and release it after approximately 0.6 seconds to directly access Low mode. Note: the light will regulate its output to prevent overheating and extend its lifespan when accessing Turbo mode for more than 30 seconds.

Remaining Battery Indicator: When the light is off, press the Mode button to activate the LED integrated in the button, the number of flashes indicates approximately the remaining capacity. 3 Flashes: battery level above 50% / 2 Flashes: battery level below 50% / 1 Flash: battery level below 10%. Note: when power level is low, the power indicator flashes every three seconds to inform the user.

Battery Charging: Connect the cable to the USB-C connection located on the side of the light. For a full charge, count approximately 2 hours. The integrated charging indicator in the buttons lights up red when the battery is charging and turns green when charged. Note: Recharge the battery when the battery indicator turns red (below 10% remaining battery).

Specifications

• LED Type: 2 x OSRAM P8 LED high performance
• Maximum output: 700 lumens
• Maximum range: 295 feet / 90 meters
• Maximum beam intensity: 2100cd
• 4 lighting modes:
• Turbo: 700 ANSI Lumens (15min) 295 feet / 90 meters 2100cd
• High: 180 ANSI Lumens (1h30) 148 feet / 45 meters 500cd
• Medium: 30 ANSI Lumens (8h) 59 feet / 18 meters 80cd
• Low: 1 ANSI Lumens (50h) 13 feet / 4 meters 4cd
• Power source: Integrated rechargeable 500mAh Li-ion battery
• Maximum runtime: 50 hours (Low mode)
• Charging port: USB-C
• Charging time: approximately 2 hours
• Charging indicator: Red LED (charging) / green (charged)
• Remaining battery indicator integrated in Mode button
• Operating modes: DEMO Mode and DAILY Mode
• Last settings memory function
• Materials: Made from aluminum with military-grade HAIII hard anodizing finish
• 2 rear metal rings with 30kg tensile strength
• Dimensions: 2.36" / 60mm x 0.96" / 24.5mm x 0.54" / 13.8mm
• Weight: 0.92oz / 26g (with battery)
• Impact resistance: 3.3 feet / 1 meter
• Waterproof rating: IP54 (dust and water splash resistant)

Box contents

• 1 Nitecore TIP SE Flashlight
• 1 Keychain ring
• 1 Removable clip
• 1 User manual